Blog | LCSC Electronics

Every wire has to end somewhere. And the moment it ends, you have a choice: solder it, crimp it, or clamp it under a screw. Pick the wrong one for the job and you get the failure pattern every engineer recognises — an intermittent joint that passes every bench test and still drops out in the field.

There is no universally best termination method. The right answer depen...

November 10-13, LCSC Electronics will exhibit at Electronica 2026 at Messe München, Munich, Germany. LCSC’s booth is located in Hall C6, Booth 101. We cordially invite you to visit us to explore what LCSC can do or discuss deeper cooperation.

Plan Your Trip

Plan your visit by contact...

If you’ve ever tried to land a stranded wire directly under a terminal block screw, you know what happens next. The strands splay. A couple breaks off under the screw head. The clamp deforms the conductor, the joint loosens through thermal cycles, and six months later you’re chasi...

You did everything right. The strip was clean, the ferrule looked full, the crimp passed the tug test, and the panel powered up without a hiccup.

Three months later, a machine on the line starts dropping out intermittently. You chase phantom grounds and reseat connectors all afternoon — and the culprit is that same crimp you were proud of.

This is the frustratin...

Industrial cable glands are essential components in electrical installations, providing a secure entry point for cables passing through control cabinets, junction boxes, machinery, and other enclosures. A cable gland that fits physically may not be suitable for the application — incorrect thread specifications, incompatible cable diameters, or unsuitable sealing designs can a...